THINSULATE LINEMAN PAC
HomeHoffman Winter Lineman Climbing Boots (PAC BOOTS) FREE SHIPPINGTHINSULATE LINEMAN PAC
Our Thinsulate Lineman Pac is very popular with those who work in milder weather conditions. Lined with a removable Thinsulate/wool/ cambrelle liner, this boot is an excellent chioce for those looking for a slimmer alternative to felt pacs. Equipped with our dual steel shanks, the Thinsulate Lineman Pac provides your arches with support unmatched by any other lineman boot of it's kind. Our 100% handmade waterproof bottom has an added layer of polyester and polyamid incorporated into the pure natural rubber to resist cracking and extend the life of the boot. If you're a lineman who works is slushy cool conditions this boot was made for you. Active warmth-0 degrees, inactive postive 20 degrees. Claw Lug (standard), Vibram Sole (available upon request). Fitting Tips: Hoffman Thinsulate-lined pacs tend to run small. Add 1 size to your current shoe size. (ie: size 9 or 9-1/2 would order a size 10). Hoffman suggests purchasing replacement liners for moisture control and to extend the life of your boots. Order thinsulate Liners for these boots. Call Jeanine @ (516) 442-1053 to order by phone. She will assist you with sizing, availability and approximate delivery time. If you know your size and do dot need assistance, we will e-mail you with the approximate delivery time. Dual Steel Shanks for Climbing Support Thinsulate Liner for Mild Comditions Industrial Grade Rubber Bottoms Rebuildable for Years of Service Available in 10", 12", and 14" Heights Sizes 6 Through 14 (whole sizes only)
15 items. | Page 1 of 1.
THINSULATE LINEMAN PAC (10"HIGH) (Plain Toe)
Price: $240.00
SKU: #1210
.1
Price: $240.00
SKU: #1210
Details: Thinsulate Lineman Pac (10" High) Active temperature 0 degrees, Inactive Temperature positive 20 degrees. Hoffman's highly recommends rotating your li...
Category: THINSULATE LINEMAN PAC.1
THINSULATE LINEMAN PAC (12"HIGH) (Plain Toe)
Price: $250.00
SKU: #1212
.2
Price: $250.00
SKU: #1212
Details: Thinsulate Lineman Pac (12" High) Active temperature 0 degrees, Inactive Temperature positive 20 degrees. Hoffman's highly recommends rotating your li...
Category: THINSULATE LINEMAN PAC.2
THINSULATE LINEMAN PAC (14"HIGH) (Plain Toe)
Price: $260.00
SKU: #1214
.3
Price: $260.00
SKU: #1214
Details: Thinsulate Lineman Pac (14" High) Active temperature 0 degrees, Inactive Temperature positive 20 degrees. Hoffman's highly recommends rotating your li...
Category: THINSULATE LINEMAN PAC.3
200 Gram Thinsulate Liner (Replacement) for 10" high thinsulate pac boot
Price: $27.00
SKU: #Tliner20010
.4
Price: $27.00
SKU: #Tliner20010
Details: 200 Gram Thinsulate liner for 10" high thinsulate pac boot
Category: THINSULATE LINEMAN PAC.4
200 Gram Thinsulate Liner (Replacement) for 12" high thinsulate pac boot
Price: $29.00
SKU: #Tliner20012
.5
Price: $29.00
SKU: #Tliner20012
Details: 200 Gram Thinsulate liner for 12" high thinsulate pac boot
Category: THINSULATE LINEMAN PAC.5
200 Gram Thinsulate Liner (Replacement) for 14" high thinsulate pac boot
Price: $31.00
SKU: #Tliner20014
.6
Price: $31.00
SKU: #Tliner20014
Details: 200 Gram Thinsulate liner for 14" high thinsulate pac boot
Category: THINSULATE LINEMAN PAC.6
400Gram Thinsulate Liner (Replacemant) for 12" high thinsulate pac boot
Price: $32.00
SKU: #Tliner40012
.7
Price: $32.00
SKU: #Tliner40012
Details: 400 Gram Thinsulate liner for 12" high thinsulate pac boot
Category: THINSULATE LINEMAN PAC.7
400Gram Thinsulate Liner (Replacemant) for 14" high thinsulate pac boot
Price: $34.00
SKU: #Tliner40014
.8
Price: $34.00
SKU: #Tliner40014
Details: 400 Gram Thinsulate liner for 14" high thinsulate pac boot
Category: THINSULATE LINEMAN PAC.8
400Gram Thinsulate Liner (Replacemant) for 10" high thinsulate pac boot
Price: $30.00
SKU: #Tliner40010
.9
Price: $30.00
SKU: #Tliner40010
Details: 400 Gram Thinsulate liner for 10" high thinsulate pac boot
Category: THINSULATE LINEMAN PAC.9
Di-ElectricThinsulate Lineman Steel Toe Pac (10"HIGH)
Price: $255.00
SKU: SKUL1210STDie
.10
Price: $255.00
SKU: SKUL1210STDie
Details: Di-Electric Thinsulate Lineman Steel Toe Pac (10" High) Active temperature 0 degrees, Inactive Temperature positive 20 degrees. Hoffman's highly recom...
Category: THINSULATE LINEMAN PAC.10
Di-ElectricThinsulate Lineman Steel Toe Pac (12"HIGH)
Price: $265.00
SKU: SKUL1212STDie
.11
Price: $265.00
SKU: SKUL1212STDie
Details: Di-Electric Thinsulate Lineman Steel Toe Pac (12" High) Active temperature 0 degrees, Inactive Temperature positive 20 degrees. Hoffman's highly recom...
Category: THINSULATE LINEMAN PAC.11
Di-ElectricThinsulate Lineman Steel Toe Pac (14"HIGH)
Price: $275.00
SKU: SKUL1214Die
.12
Price: $275.00
SKU: SKUL1214Die
Details: Di-Electric Thinsulate Lineman Steel Toe Pac (14" High) Active temperature 0 degrees, Inactive Temperature positive 20 degrees. Hoffman's highly recom...
Category: THINSULATE LINEMAN PAC.12
Thinsulate Lineman Steel Toe Pac (10"HIGH)
Price: $250.00
SKU: SKU1210ST
.13
Price: $250.00
SKU: SKU1210ST
Details: Thinsulate Lineman Steel Toe Pac (10" High) Active temperature 0 degrees, Inactive Temperature positive 20 degrees. Hoffman's highly recommends rotati...
Category: THINSULATE LINEMAN PAC.13
Thinsulate Lineman Steel Toe Pac (12"HIGH)
Price: $260.00
SKU: SKUL1212ST
.14
Price: $260.00
SKU: SKUL1212ST
Details: Thinsulate Lineman Steel Toe Pac (12" High) Active temperature 0 degrees, Inactive Temperature positive 20 degrees. Hoffman's highly recommends rotati...
Category: THINSULATE LINEMAN PAC.14
Thinsulate Lineman Steel Toe Pac (14"HIGH)
Price: $270.00
SKU: SKUL1214ST
.15
Price: $270.00
SKU: SKUL1214ST
Details: Thinsulate Lineman Steel Toe Pac (14" High) Active temperature 0 degrees, Inactive Temperature positive 20 degrees. Hoffman's highly recommends rotati...
Category: THINSULATE LINEMAN PAC.15
Categories
Categories
Hide Categories[-]
- Champion- Professional Grade Cutting Tools
- CARBIDE TIPPED HOLE CUTTERS / CUT STAINLESS STEEL [Show subcategories]
- Champion CT5 Carbide Tipped Hole Cutters 3/16" Depth of Cut
- Carbide Tipped Hole Cutter Sets | 3/16" Depth of Cut | Champion Brand CT5
- Champion CT7 Carbide Tipped Hole Cutters 1" Depth of Cut
- Carbide Tipped Hole Cutter Sets | 1" Depth of Cut | Champion Brand CT7
- Champion CT9 Carbide Tipped Hole Cutters 2" Depth of Cut
- Champion CT3 Carbide Tipped Hole Cutters 3/16" Depth of Cut 1/4" Hex Shank
- Champion Carbide Tipped Hole Cutter Accessories
- CARBIDE BURS [Show subcategories]
- Champion Titanium Coated Carbide Burs [Show subcategories]
- Cylinder Shape Carbide Burs
- Cylinder End Cut Shape Carbide Burs
- Cylinder Radius End Shape Carbide Burs
- Ball Shape Carbide Burs
- Oval Shape Carbide Burs
- Tree Shape Carbide Burs
- Tree Shape Radius End Carbide Burs
- Flame Shape Carbide Burs
- Cone Shape Carbide Burs
- (60 Degree) Cone Shape Carbide Burs
- 14 Degree Taper Shape Radius End Carbide Burs
- Inverted Cone Shape Radius End Carbide Burs
- Champion Solid Carbide Burs Uncoated 1/4" Shank [Hide subcategories]
- Uncoated Cylinder Shape Carbide Bur
- Uncoated Cylinder Shape End Cut Carbide Bur
- Uncoated Cylinder Radius End Double Cut Carbide Bur
- Uncoated Ball Shape Carbide Bur
- Titanium Coated Non-Ferrous Carbide Burs [Show subcategories]
- Cylinder Shape Titanium Coated Non-Ferrous Carbide Burs
- Cylinder Radius End Titanium Coated Non-Ferrous Carbide Burs
- Ball Shape Titanium Coated Non-Ferrous Carbide Burs
- Oval Shape Titanium Coated Non-Ferrous Carbide Burs
- Tree Radius Shape Titanium Coated Non Ferrous Carbide Burs | Champion Brand
- 14 Degree Taper Radius Non Ferrous Titanium Coated Carbide Burs | Champion Brand
- Extended Length Champion Titanium Coated Carbide Burs
- CARBIDE TIPPED DRILLS [Show subcategories]
- Champion Solid Carbide Twist Drills For Non Ferrous Metals
- Champion Mono Spur Single Flute Auger Drills
- Champion Wood Boring Bits 16" Spade Style
- Champion Heavy Duty 17" Auger Bits
- Champion Bellhanger Drills
- Champion Heavy Duty 6" Auger Bits
- Champion Auger Extensions
- Champion Hammer Bit Core Drill Shank Adapters
- Champion SDS Plus Hammer Bits
- Carbide Tipped Masonry Drills
- Champion's Glass & Tile Drills
- Champion Carbide Tipped Die Drills
- Champion D1 Drill Drift Keys
- Champion Solid Carbide Fiberglass Routers No End Cut
- Champion Solid Carbide Fiberglass Routers Drill End
- Champion US12 HSS Black finish Silver & Deming
- Champion XGO BlackGold Drill
- Champion High Speed Metric Annular Cutters
- COUNTERSINKS [Show subcategories]
- Champion Combined Drill and Countersinks Extra Long
- Champion Combined Drill and Countersinks Bell Style
- Champion Combined Drill and Countersinks
- Champion Large Four Flute Countersinks
- Champion Machine Four Flute Countersinks
- Champion Zero Flute Countersinks Deburring Tools
- Champion Zero Flute Countersinks
- Champion Countersinks
- EXTRA LENGTH DRILLS [Show subcategories]
- Champion 7006 Heavy Duty Split Point 6" Aircraft Extension Drills
- Champion 7012 Heavy Duty Split Point 12" Aircraft Extension Drills
- Champion CS6X Contractor Series 6" Aircraft Extension Drills
- Champion CS12X 12" Aircraft Extension Drills
- Champion 1200 Longboy Drills
- Champion 1212 - 1/2" Shank Longboy Drills
- Champion 1800 Longboy Drills
- END MILLS [Show subcategories]
- Champion Solid Carbide Single End Two Flute End Mills
- Champion Solid Carbide Double End Two Flute End Mills
- Champion Solid Carbide Single End Four Flute End Mills
- Champion Solid Carbide Double End Four Flute End Mills
- Champion Single End 2 Flute End Mill
- Champion Single End 2 Flute Cobalt Steel End Mill
- Champion 601 High Speed Single End Multi Flute End Mills
- Champion Single End Multi Flute Cobalt Steel End Mill
- Champion 601T TiN Coated Single End Multi Flute HSS End Mills
- Champion Double End 2 Flute High Speed Steel End Mill
- Champion Double End 2 Flute Cobalt Steel End Mill
- Champion 603 Double End 4 Flute HSS End Mills
- Champion Single End 2 Flute Ball Nose High Speed End Mills
- Champion Double End 2 Flute Ball Nose High Speed End Mills
- Champion Single End Multi Flute Center Cut High Speed End Mills
- Champion 607 Double End 4 Flute Center Cutting High Speed Steel End Mills
- Champion Double End 4 Flute Cobalt Steel End Mill
- Champion Single End Multi Flute High Speed Long End Mills
- Champion Single End Multi Flute Cobalt Roughing End Mills
- Champion Single End Multi Flute Extra Long End Mills
- Champion Single End Corner Rounding End Mills
- Champion Solid Carbide Fiberglass Routers End Mill Cut
- JOBBER DRILLS [Show subcategories]
- Champion 705 General Purpose Jobber Drill [Show subcategories]
- Champion 705 General Purpose Jobber Drill Number Sizes
- Champion 705 General Purpose Jobber Drill Alphabetical Sizes
- Champion 705 General Purpose Jobber Drill Fractional Sizes
- Champion 705C Cobalt Jobber Drills [Show subcategories]
- Champion 705C Cobalt Jobber Drills Number Sizes
- Champion 705C Cobalt Jobber Drills Alphabetical Sizes
- Champion 705C Cobalt Jobber Drills Fractional Sizes
- Champion 705SP Heavy Duty Split Point Jobbers [Show subcategories]
- MISCELLANEOUS [Show subcategories]
- Champion 1805 Double End Sheeter Drills
- Champion Drill Gauge Plates
- Champion 2005 Corrugated Construction Drills
- Champion Pilot Drill for HoleSaws
- REDUCED SHANK DRILLS [Show subcategories]
- Champion 712 Silver & Deming Drills
- Champion 712CO Cobalt Heady Duty Silver & Deming Drills
- Champion XG12 Black Gold Silver & Deming Drills
- Champion XG38 Black Gold 3/8" Shank Jobber Length Drills
- REAMERS [Show subcategories]
- Champion Straight Flute Taper Pin Reamers
- Champion Fast Spiral Machine Taper Pin Reamers
- Champion Slow Spiral Taper Pin Reamers
- Champion Adjustable Blade Hand Reamers
- Champion Extension Pilots For Adjustable Reamers
- Champion Straight Flute Hand Reamers
- Champion Spiral Flute Hand Reamers
- Champion Straight Flute, Taper Shank Chucking Reamers
- Champion Straight Flute, Straight Shank Fractional Chucking Reamers
- Champion Straight Flute, Straight Shank Letter Size Chucking Reamers
- Champion Straight Flute, Straight Shank Wire Gauge Chucking Reamers
- Champion Straight Flute, Taper Shank Right Hand Cut Bridge Reamers
- Champion 982 Spiral Flute Taper Shank Bridge Reamer
- Champion SA80 Straight Shank Maintenance Reamers
- Champion HX80 Hex Shank Straight Flute Car Reamers
- Champion HX82 Hex Shank Spiral Flute Car Reamers
- SETS [Show subcategories]
- SCREW MACHINE DRILLS [Show subcategories]
- Champion 2705 1/4" Shank Screw Machine Drills
- Champion 2905 3/8" Shank Screw Machine Drills
- 1/4" SHANK DRILLS
- Champion 1705 - Split Point Screw Machine Drills
- Champion 1705C - Heavy Duty Cobalt Split Point Screw Machine Drills
- STEP DRILLS [Show subcategories]
- TAPER SHANK - LENGTH DRILLS [Show subcategories]
- Champion 702 Taper Shank Drills
- Champion 704 Taper Length General Purpose Drills
- Champion S1 Taper Shank Reducing Sleeves
- Champion S2 Taper Shank Extension Sockets
- TAPS & DIES [Show subcategories]
- Champion Carbon Steel and Metric Plug Style Hand Taps
- Champion Carbon Steel Taper Pipe Taps
- Champion High Speed Steel Hand Taps
- Champion Left Hand High Speed Steel Hand Taps
- Champion Metric High Speed Steel Hand Taps
- Champion Spiral Point Taps
- Champion Taper Pipe Taps
- Champion High Speed Straight Pipe Taps
- Champion High Speed Nut Taps
- Champion Pulley Extension Taps 6"
- Champion 8 Thread Special High Speed Hand Taps
- Champion DT22 Combination Tap & Drill
- Champion DT22HEX Hex Shank Combination Drill & Taps
- Champion DT22HEXM Hex Shank Metric Combination Drill & Taps
- Champion DT22M Combination Tap & Drill
- Champion DT22T Combination Tap & Drill
- Champion Tap Wrenches and Dies Stocks
- Champion Heavy Duty Spiral Flute Taps
- Champion Hexagon Rethreading Dies
- Champion 8 Thread Special Carbon Steel Hexagon Rethreading Dies
- Champion Carbon Round Dies
- Champion Screw Adjustable Round Dies
- Champion Hex Converter for Round Dies
- TOOL BITS [Show subcategories]
- Champion 515 High Speed Square Tool Bits
- Champion 516 Cobalt Square Tool Bits
- Champion Brazed Carbide Tool Bits- Straight Turning Tools
- Champion Brazed Carbide Tool Bits- Lead Angle Turning Tools
- Champion Brazed Carbide Tool Bits- Square Nose Tools
- Champion Brazed Carbide Tool Bits- Pointed Nose Tools
- Champion Brazed Carbide Tool Bits- Threading Tools
- CHAMPION WOOD CUTTING DRILLS [Show subcategories]
- Brute Platinum- Heavy Duty Cutting Tools
- DRILL BITS FOR STAINLESS STEEL/ BRUTE PLATINUM XL SERIES-CHAMPION BRAND [Show subcategories]
- DRILL BITS FOR STAINLESS STEEL/ BRUTE PLATINUM XL5 SERIES/JOBBER LENGTH -CHAMPION BRAND [Show subcategories]
- DRILL BITS FOR STAINLESS STEEL/ BRUTE PLATINUM XL5 SERIES/JOBBER LENGTH -CHAMPION BRAND Fractional Sizes
- DRILL BITS FOR STAINLESS STEEL/ BRUTE PLATINUM XL5 SERIES/JOBBER LENGTH -CHAMPION BRAND Number Sizes
- DRILL BITS FOR STAINLESS STEEL/ BRUTE PLATINUM XL5 SERIES/JOBBER LENGTH -CHAMPION BRAND Alphabetical Sizes
- Champion Brute Platinum XL8 Metric Jobber Drills
- Champion XL28 Brute Platinum Mechanics Length Drills
- Champion XM28 Brute Platinum 3-Flats Straight Shank Mechanics Length Drills
- Champion XL5LH Brute Platinum Left Hand Drill
- CUTTING LUBRICATION
- REDUCED SHANK DRILLS [Show subcategories]
- RotoBrute- Drilling system for structural steel
- MAGNETIC DRILL PRESSES / SUPER SALE!
- ANNULAR CUTTERS [Show subcategories]
- Champion RotoBrute Carbide Tipped Annular Cutters [Show subcategories]
- 1-3/8" Depth of Cut Carbide Tipped Annular Cutters | Champion RotoBrute CT-150
- 2" Depth of Cut Carbide Tipped Annular Cutters | Champion RotoBrute CT-200
- 3" Depth of Cut Carbide Tipped Annular Cutters | Champion RotoBrute CT300
- 4" Depth of Cut Carbide Tipped Annular Cutters | Champion RotoBrute CT400
- Champion's RotoBrute High Speed Steel Annular Cutters [Show subcategories]
- Cobalt Stack Cut Annular Cutters | Champion Brand
- Aircraft Extension Drills, 6" and 12" lengths
- High Speed Steel, Aircraft Extension Drills, 6" length [Show subcategories]
- HIGH Speed Steel, Aircraft Extension Drills, 12" lengths [Show subcategories]
- Annular Cutters-Carbide Tipped, Champion Brand
- Carbide Tipped Annular Cutters-1-3/8" Depth of Cut
- Carbide Tipped Annular Cutters-2" Depth of Cut
- Carbide Tipped Annular Cutters- 3" Depth of Cut
- Carbide Tipped Annular Cutters-4" Depth of Cut
- Pilot Pins For Carbide Tipped Annular Cutters, Champion Brand
- Annular Cutters-High Speed Steel
- Ship Auger bits/Utility Pole Auger Bits / Impact/ Hex Shank/ Quick Release
- "028" SERIES STANDARD SHIP AUGER UTILITY POLE AUGER BITS/ QUICK CHANGE
- "038" SERIES "NAIL CHIPPER" Ship Auger, UTILITY POLE AUGER BITS/ QUICK CHANGE
- "088" SERIES DEEP CUT SHIP AUGERS, UTILITY POLE AUGER BITS
- Blades
- Bridge Reamers
- Bridge Reamers-Taper Shank-Spiral Flute
- Hex Shank Bridge Reamers-Short Length
- Hex Shank Bridge Reamers-Long Length
- High Speed Steel Adjustable Hand Reamers
- Burrs/Carbide Burrs,Rotary Files-Double Cut For Grinding Ferrous Metals
- CYLINDRICAL, CARBIDE BURRS/ROTARY FILES
- CYLINDRICAL, (END- CUT) CARBIDE BURRS/ROTARY FILES
- CYLINDRICAL, (RADIUS-END), CARBIDE BURR/ROTARY FILE
- BALL-END, CARBIDE BURRS, ROTARY FILES
- OVAL-CARBIDE BURRS/ROTARY FILES
- TREE (RADIUS END) CARBIDE BURR/ROTARY FILE
- TREE (POINTED END) CARBIDE BURRS/ROTARY FILES
- FLAME SHAPED, CARBIDE BURR/ROTARY FILE
- 60 DEGREE (INCLUDED ANGLE) CARBIDE BURR
- CONE (RADIUS-END 14 DEGREE TAPER) CARBIDE BURR
- CONE (POINTED END) CARBIDE BURR
- INVERTED CONE, CARBIDE BURRS/ROTARY FILES
- 6" OVERALL LENGTH CARBIDE BURRS/ROTARY FILES
- Burrs/Carbide Burrs For Grinding Aluminum And Non-Ferrous Metals
- CYLINDRICAL CARBIDE BURRS FOR GRINDING ALUMINUM AND NON-FERROUS METAL
- CYLINDRICAL (RADIUS END) CARBIDE BURRS FOR ALUMINUM AND NON-FERROUS METALS
- BALL-END CARBIDE BURRS FOR ALUMINUM AND NON-FERROUS METALS
- TREE (RADUIUS END) CARBIDE BURRS FOR ALUMINUM AND NON-FERROUS METALS
- CONE (RADIUS-END) CARBIDE BURRS FOR ALUMINUM AND NON-FERROUS METALS
- CYLINDRICAL (END-CUT) CARBIDE BURRS FOR ALUMINUM AND NON-FERROUS METALS
- OVAL CARBIDE BURRS FOR ALUMINUM AND NON-FERROUS METALS
- Car and Truck Body Reamers-1/2" Round Shank Reamers
- Countersinks
- Cutting And Tapping Fluid
- Diamond Core Bits/Wet Diamond Core Bits
- Dies, Carbon Steel, Hex Style
- Special Thread, Metric Size, Carbon Steel, Hex Dies
- Standard Thread, Metric Size, Carbon Steel, Hex Dies
- Carbon Steel, Hex Dies, Machine and Fractional Sizes
- Special Thread, Machine and Fractional Size, Carbon Steel Hex Dies
- DIES, Round Adjustable -HIGH SPEED STEEL
- Fractional Size, Special Thread, High Speed Steel, Round Adjustable Dies-13/16" Outside Diameter
- Fractional Size, Special Thread, High Speed Steel, Round Adjustable Dies-1" Outside Diameter
- Fractional Size, Special Thread, High Speed Steel, Round Adjustable Dies-1-1/2" Outside Diameter
- Fractional Size Special Thread, High Speed Steel, Round Adjustable Dies-2" Outside Diameter
- Fractional Size, Special Thread, High Speed Steel, Round Adjustable Dies-2-1/2" Outside Diameter
- Fractional Size, Special Thread, High Speed Steel, Round Adjustable Dies 3" Outside Diameter
- Standard Fractional Size. High Speed Steel, Round Adjustable Dies [Show subcategories]
- 13/16" Outside Diameter, High Speed Steel, Round Adjustable, Standard Size Dies
- 1" Outside Diameter, High Speed Steel, Round Adjustable, Standard Size Dies
- Special Metric Thread, High Speed Steel, Round Adjustable Dies-13/16" Outside Diameter
- Special Metric Thread, High Speed Steel, Round Adjustable Dies-1" Outside Diameter
- Round Die-Die Stocks
- Drill Bits/Individual Cobalt Drill Bits, Jobber Length
- WIRE GAUGE SIZE, SPLIT POINT, COBALT STEEL, JOBBER LENGTH DRILL BITS
- FRACTIONAL SIZE, SPLIT POINT, COBALT STEEL DRILL BITS, JOBBER LENGTH
- METRIC SIZE, COBALT DRILL BIT, JOBBER LENGTH
- Drill Bits/Individual High Speed Drill Bits, Jobber Length
- FRACTIONAL SIZE, HIGH SPEED STEEL DRILL BITS, JOBBER LENGTH
- WIRE GAUGE SIZE, HIGH SPEED STEEL DRILL BITS, JOBBER LENGTH
- LETTER SIZES, INDIVIDUAL HIGH SPEED STEEL DRILL BITS, JOBBER LENGTH
- INDIVIDUAL METRIC SIZE HIGH SPEED STEEL DRILL BITS, JOBBER LENGTH
- SURFACE TREATED, HIGH SPEED STEEL DRILL BITS, JOBBER LENGTH
- INDIVIDUAL, 1/2"REDUCED SHANK, HIGH SPEED STEEL DRILL BIT, JOBBER LENGTH
- Drill Bit Sets In Drill Index Boxes
- Drill Bits-1/2" Reduced Shank High Speed Steel Drill Bits
- Drill Bits-1/2"Reduced Shank, Cobalt Steel,Heavy Duty Notched Point Drill Bits
- Drill Bit Sets In Plastic Coolers
- Drills Bits For Drilling Hardened Steel
- Glass and Tile Drills
- Hoffman Brand Lineman Climbing Boots (FREE SHIPPING) [Show subcategories]
- 10" and 16" Composite Toe Dri-Line (EH Rated) Boots
- Pole Climber Boots 10", 12", and 16" (Steel Toe Optional) FREE SHIPPING
- 10" Brown P0LECLIMBER (STEEL TOE OPTIONAL)
- Electrical Hazard, (EH) Poleclimber
- 10" HOFFMAN DRI-LINE Climbing Boots (non-steel toe, steel toe, & insulated)
- 16" HOFFMAN DRI-LINE (non-steel toe & steel toe)
- 10" HOFFMAN POWERLINE (non-steel toe, steel toe, & insulated)
- 10" ALL LEATHER POWERLINE (Safety toe optional)
- 15" HOFFMAN POWERLINE (STEEL TOE OPTIONAL)
- 10" SAGE POWERLINE (Steel Toe) insulated & non-insulated
- 10"DESERT POWERLINE
- LINEMAN HIKER (Steel Toe Optional)
- 10" ROPER LINEMAN (non-steel & steel toe)
- 10" TROOPER LINEMAN
- Hoffman Winter Lineman Climbing Boots (PAC BOOTS) FREE SHIPPING
- "Hole Cutters" Tungsten Carbide Tipped/Cuts Stainless Steel
- Tungsten Carbide Tipped Hole Cutter-Shallow, cuts material up to 3/16"thick
- Tungsten Carbide Tipped Hole Cutters-Deep, cuts material up to 1/2" thick
- Tungsten Carbide Tipped Hole Cutters-1-3/8" Depth of Cut "Turbo"
- Replacement Parts For Tungsten Carbide Tipped Hole Cutters
- Holesaws
- BI-METAL HOLE SAWS
- Premium Grade Bi-Metal Holesaws (ITM) Brand
- Carbide Grit Holesaws
- HOLE SAW ACCESSORIES
- PRECISION MEASURING INSTRUMENT
- Lineman Tee Shirts Made in U.S.A. (Free Delivery!)
- Skull Lineman Tee Shirts Made in U.S.A. (Free Delivery!)
- Lineman Tee Shirts Color: Black Made in U.S.A. (Free Delivery!)
- Lineman Tee Shirts Color: Blue Made in U.S.A. (Free Delivery!)
- Screw Extractor Set
- SDS Plus Masonry HammerDrill Bits
- Step Drills, Self-Starting, , Multiple Hole, Step Drills
- INDIVIDUAL, SELF -STARTING, MULTIPLE HOLE, STEP DRILLS
- SETS OF SELF -STARTING, MULTIPLE HOLE, STEP DRILLS
- Taps
- High Speed Steel, Hand Taps, Standard Machine and Fractional Sizes
- HIGH SPEED STEEL, HAND TAPS, METRIC SIZES
- HIGH SPEED STEEL, HAND TAPS, SPECIAL METRIC SIZES
- SPECIAL THREAD FRACTIONAL TAPS
- HIGH SPEED STEEL, 8 PITCH TAPS
- HIGH SPEED STEEL, NPT PIPE TAP
- HIGH SPEED STEEL, NPS PIPE TAP
- High Speed Steel, Spiral Pointed/Machine Taps [Show subcategories]
- High Speed Steel, Spiral Pointed/Machine Taps-Fractional and Machine Sizes
- High Speed Steel, Spiral Pointed/Machine Taps-Metric Sizes
- LEFT HAND THREAD, HIGH SPEED STEEL HAND TAPS
- INTERRUPTED PIPE THREAD-NPT (SPECIAL PURPOSE)
- Adustable Tap Wrenches
- T-Handle Tap Wrenches
- Tools
- T-Shirt "Holesaws Unlimited Pin Up Girl"
- WOOD DRILLS/DOUBLE TWIST
- 1/4" Reduced Shank High Speed Steel Drill Bits
- 3/8" Reduced Shank High Speed Steel Drill Bits
- Wood Owl Overdrive Fast Boring Wood Bits 6-1/2" Overall Length
- Champion 405 Bright Finish Drills
- LOCKSMITH'S DRILLS FOR DRILLING HARDENED STEEL CHAMPION BRAND
- Champion Tap & Die Sets
